1 meter of 3mm thick elastic cord identical to those used on SPES and Swordmaster equipment. You can use it to replace or reinforce the fastening of your protections.

• Lobster Gloves V1 and V2
• Plastic shells for PRO jacket

Molded plastic shell to use under your gloves to protect fingertips.

• Set of 10 pieces

These quilted leather gloves offer excellent dexterity for artistic fencing and performing arts. Designed to combine dexterity and authenticity, they are perfect for light technical training and demonstrations.

• Made from high-quality leather for optimal durability
• Fine padding for protection against light impacts
• Historical design suitable for period costumes
• Excellent flexibility for precise weapon handling
• Ideal for the rapier, arming sword, and light weapons

These protective gloves, inspired by Lacrosse, offer excellent protection for practitioners of Historical European Martial Arts (HEMA). They combine the robustness needed for intensive training with flexibility for precise weapon handling.

• Covered with a thick layer of high-density foam for optimal protection
• Ideal for beginners and light sparring
• Enhanced protection on the thumb and edge of the hand
• Excellent finger mobility for better grip
• Suitable for various weapons, particularly recommended for the poleaxe

Next-generation mitten gloves with 800N puncture resistance, specially designed for low-intensity HEMA training with one-handed weapons. Historical design with gray synthetic leather and smart foam.

• Certified 800N with soft protection (felt + smart foam)
• Ideal for light sparring with one-handed simulators
• Gray synthetic leather interior for a secure grip

Version 2

The perfect balance between protection and dexterity. Strong leather gloves reinforced with foam plates and Kevlar shell over the knuckles.

 Recommended for :

• Mixed training
• Technical work
• Light sparring

Model  "Longsword Badass design"

 This protective overlay is designed to fit Thokk Gauntlets and provides additional protection especially for steel longsword tournaments.

• Preserves the flexibility of the THOKK Gauntlets
• Fits perfectly
• Suitable for steel competition

Great value for complete training. Full protection of the hand and the fingers thanks to foam padding and plastic overlapping. Recommended for synthetic waster trainings

• Microfiber fabric for better durability
• Flared at the wrist
• Available in 2 sizes

The THOKK undergloves are now available as a replacement part and are 100% identical to the undergloves provided with all pairs of THOKK WeaponMaster® gloves.

• Integrated rigid protection for the fingertips
• Available in 6 sizes for a perfect fit
• Sold in pairs

These professional gloves, developed in collaboration with Ukrainian sabreurs, offer complete protection up to 5 cm beyond the wrist. Their construction, combining ultra-high-density polyethylene and 3mm EVA, provides sufficient protection even against powerful strikes, while maintaining remarkable dexterity for saber techniques.

• Flared cuff protecting the wrist
• Double protection: polyethylene plates + 3mm EVA
• Sold individually
• Excellent dexterity close after break-in
• Compatible with other weapons like the Longsword

The "Firestone 2" HEMA gloves represent a major evolution in hand protection for historical fencing with one-handed weapons. The result of two years of development and customer feedback, these gloves combine comfort, protection, and precision.

• Designed for sabers, Bolognese swords and one-handed weapons without complex guards
• Made from genuine leather resistant to wear
• Plastic reinforcements on the fingers for maximum protection
• Silicone palm for perfect grip
• Ergonomic design for better weapon handling
• Excellent value for money

Although the ProGauntlets are no longer being sold, these authentic undergloves offer the opportunity to extend the lifespan of your ProGauntlet gauntlets.

• Last stocks available following the closure of CrossGuard
• Identical to the undergloves provided with the original ProGauntlet gauntlets

Black goatskin gloves with PORETEN reinforcement, durable aramid stitching, and comfortable lining. Ideal for HEMA fencing.

• Durable black leather
• Impact-resistant PORETEN reinforcement
• Durable aramid stitching
• Functional Lycra-PESh lining
• Easy maintenance with a damp cloth

One size : Medium (9)

One of the most advanced models in the category of soft gloves, the Swordmaster War Gloves incorporate Dyneema® fabric for exceptional resistance to cuts and abrasion. The carbon shells on the knuckles and the back of the hand offer impact protection superior to traditional Kevlar gloves, while maintaining the flexibility necessary for fine weapon handling.

• Ultra-resistant Dyneema® fabric: exceptional strength-to-weight ratio
• Carbon protective shells on the knuckles and back of the hand
• Reinforced thumb protection with non-slip silicone gel on the palm
• Recommended for rapier, saber, sidesword, arming sword, and moderate drilling with the Longsword

HEMA GUARDIANS V2 Gauntlets, the hard-shell gloves offering the best value for money

• Very resistant polypropylene shells
• Improved wrist mobility
• Thumb protected on 3 sides
• Elastic lacing at the wrist level
• Sizes from XS-XL

These professional gloves, developed in collaboration with Ukrainian sabreurs, offer complete protection up to 5 cm beyond the wrist. Their construction, combining ultra-high-density polyethylene and 3mm EVA, provides sufficient protection even for powerful strikes, while maintaining remarkable dexterity for saber techniques.

• Flared cuff protecting the wrist
• Double protection: polyethylene plates + 3mm EVA
• Sold in pairs (identical right and left hand)
• Excellent dexterity close after break-in
• Compatible with other weapons like the Longsword

The Raphael gloves are the entry-level model at CHFG. Designed to make quality shell protection accessible, they focus on the essential features of the higher-end models with a simplified construction.

• Exceptional value for money to discover quality shell gloves
• Protection suitable for moderate to intensive use
• Reinforced thumb with full coverage and optional removable shell

Version V3.0 (2024)

New SPES Lobster V3 Gauntlets with a redesigned thumb for optimal protection and improved grip.

• New three-piece thumb
• Better wrist coverage

Innovative protective gloves specifically designed for Historical European Martial Arts, combining perfect mobility and maximum impact absorption thanks to their advanced synthetic material construction.

• Hardened Styrogum construction with variable thicknesses (8mm hands/thumbs, 6mm cuffs)
• Internal impact protection Poron XRD-15197-35
• Ultra-resistant Cordura® exterior
• Three cuff variants available (standard, hourglass, long)

The Milaneski Sparring Gloves represent the pinnacle of protection for Historical European Martial Arts. Designed with cutting-edge synthetic materials, they combine maximum protection with exceptional dexterity for intensive practice.

• Multilayer protection: Hardened Styrogum, high-resistance HDPE, and Kevlar® undergloves
• Custom fabrication: Customizable according to your body shape and needs
• Preserved dexterity: Ergonomic design allowing precise weapon handling
• Ethical materials: 100% synthetic, free from animal products

Sparring Gloves, gants coqués modèle "Special" 5-Doigts par Sparring Gloves, dotés d'une manchette standard, conçus pour maximiser la mobilité et la protection dans la pratique des AMHE

WeaponMaster® Gauntlets "PRO" 

Next-gen protection: Equipped with exclusive THOKK® ScutuM® flexible composite.

This innovation combines the protection of heavy gauntlets with the comfort of lightweight gloves.

• Reactive material that stiffens on impact.
• Only 4mm thick 
• 350N certified elastic fabric
• Rigid fingertip shell
• Compatible with the "Longsword design" overlay

Also available in 800N version

The Michael gloves from CHFG are heavy clamshell-style gauntlets designed for the Longsword. This model prioritizes full protection while maintaining a 12.9 cm profile compatible with most handles.

• Full clamshell protection with overlapping rigid plates encouraging blows to slide off
• Low profile of 12.9 cm compatible with most saber and buckler handles
• Ergonomic construction promoting a natural grip on the sword despite the clamshell (mitten) design
• Repair kit included with spare parts and maintenance tools

The HEMA "Black Knight" gauntlets, manufactured by HF Armory in Ukraine, represent excellence in protection for Historical European Martial Arts. Designed for competitions and intense fights with steel weapons, these gloves combine maximum safety and optimal mobility.

• Superior protection, ideal for HEMA competitions
• Robust polypropylene construction with padded inner lining
• Leather palm for perfect grip
• Reinforced thumb with protection on 3 sides and top
• Articulated plates for excellent wrist mobility
• Weight less than 1 kg per pair for extended comfort